MICRO for CNC Milling Machine centres and Lathes - 2.2kW - 4kW - 5.5kW Screw Air Compressor

The MICRO range is ideal for small CNC Milling Machines Centres and Lathes
(CNC stands for Computer Numerical Control) CNC centres are automatic machines that are programmed to repeatedly process a component following a coded programmed instruction and without the need for operator input. Usually the whole or most of the process is ran by compressed air.

Compressed air is critical for any Machine Shop. Cutting, shaping, drilling, and finishing and other machinin, g centres rely heavily on the compressed air system to assist in a variety of operation processes. Commonly the parts produced are used in the machine industry, car industry or even the aircraft industry. Traditionally Compressed Air is used to power the moving parts of the machine or tool by making use of the properties of compressed air to generate rotational or linear movement as an intermittent or continuous source of air set at the right pressure.

The compressed air requirements are usually found on the manual of the machine, however if in doubt our technical support team will be pleased to assist you, this is a completely free service from FPS, please email support@fps-compressors.co.uk