- Home
- Products
-
Brands
- NUAIR Piston Compressors
- FINI Piston Compressors
- Power System Compressors
- FINI Screw Compressors
-
FSN - Spare Parts & Accessories
- Piston Compressors Pumps
- Lubricants
- Consumables
- Pulleys, Belt Guards and Motors
- Vertical Air Receivers
-
Air Line Fittings
- 1050 - Cap with Cylindrical Thread
- 1051 - Nipple with Conical Thread
- 1052 - Nipple with Cylindrical Thread
- 1054 - Connection with Cylindrical Thread
- 1055 - Reducer with Male/Female Cylindrical Thread
- 1060 - "L" Joint with Female/Female Thread
- 1064 - "I" Joint with M-F-F Thread
- 1068 - Cross Joint with M-F-F Thread
- 1069 - Cross Joint with M-F-F-F Thread
- 1071 - "V" Joint with M-F-F Thread
- 1072 - "V" Joint with F-F-F Thread
- View All Air Line Fittings
- Quick Release Couplings
- View All FSN - Spare Parts & Accessories
- Medical
-
FSN - Compressed Air Treatment & Accessories
- RD Range of Refrigerated dryers
- Adsorption Dryers
- Breathing Air Dryers
- Compressed Air Filtration
- Higher Temperature and Dew Point Air Dryers
- Condensate Drains
- Oil Water Separators for Condensate
- Nitrogen Generators
- Heat Recovery System
- Air Receivers
- View All FSN - Compressed Air Treatment & Accessories
- FPS - Other Product Brands
- View All Brands
- Spares and Accessories
- Technical Support
- News
- Jobs
- Calculators
- Contact Us
- HELP
- Home
-
Products
- Piston Compressors to 7.5kW
- NUAIR Piston Compressors
- FINI Piston Compressors
- PS - Cast Iron Compressors
- Super Silent Hermetic
- COLTRI - 220/300 bar Breathing Compressors
- FINI Screw compressors 2.2 - 90 kW
- Mini CUBE 2.2 kW
- CUBE 4.0 to 7.5 kW
- MICRO Series 2.2kW - 5.5kW
- PLUS Series 7.5kW - 75kW
- PLUS VS Series 22kW - 75kW
- VISION Series 7.5kW - 75kW
- K-MAX Series 7.5kW - 22kW
- K-MAX VS Series 7.5kW - 15kW
- PS Screw & SCROLL Compressors to 250 kW
- PASCAL Series 2.2kW - 15kW
- G-TEC Series 7.5kW - 22kW
- NOBEL Series 5.5kW - 90kW
- FLEMING Series 2.2kW - 30kW
- Oil Free & SCROLL Compressors
- Airbrush
- Oil Free Compressors for Home & DiIY Use
- ECOmed
- FINI - SIL-DRY
- MGF - PURE AIR
- FINI - MEDICAIR
- Ventilators & Medical Applications
- PS - FLEMING 2.2kW - 22kW
-
Brands
- NUAIR Piston Compressors
- Direct Drive Piston
- Belt Driven Piston
- Petrol Piston
- Low Noise Piston
- Pumps, Spares and Accessories
- FINI Piston Compressors
- Direct Drive Compressors
- Base-Plate Mounted Air Compressors
- Silenced Compressors
- Petrol Compressors Models
- Power System Compressors
- PASCAL SERIES 2.2 - 15 kW
- G-TEC 7.5 - 22 kW
- NOBEL 5.5kW - 90kW
- FLEMING (SCROLL) 2.2 - 22 kW
- FINI Screw Compressors
- Mini CUBE 2.2 kW
- MICRO 2.2kW - 5.5kW
- NEW CUBE 4kW - 7.5kW Screw Compressor
- PLUS 7.5kW - 75kW
- MICRO 2.2 to 5.5 kW
- QUADRO 7.5 to 15 kW
- VISION 7.5 to 22 kW
- K-Mid 5.5 to 7.5 kW
- K-Max 11 to 15 kW
- PLUS SD 18.5 to 22 kW
- VISION 7.5kW - 22kW
- K-MAX 5.5kW - 90kW - Fixed & Variable Speed
- FSN - Spare Parts & Accessories
- Piston Compressors Pumps
- FINI Compressors Pumps
- NUAIR - SHAMAIL (and ABAC compatible ) compressor Pumps
- CHINOOK Compressor Pumps
- Oil Free Dental Quality Pumps
- Super Silent Hermetic Compressor Pumps
- Lubricants
- Piston Compressor Lubricants
- Screw Compressor Lubricants
- Screw Compressor Lubricants - Food Quality
- Breathing Air Compressor Lubricants
- Hermetic Air Compressor Lubricants
- Consumables
- NEMA Pressure Switches
- CONDOR Pressure Switches
- Pressure Switch Drain Valve
- STAR DELTA Starter
- Non Return Valves (NRV)
- Pastels and Springs
- Safety Valves
- Pressure Gauges
- Pressure Regulatior
- Inline Filters/Regulators/Lubricators
- Compressed Air Filters
- Pulleys, Belt Guards and Motors
- Pulleys
- Belts
- Belt Guards
- Overload Switches
- Capacitators
- Anti Vibration Mountings
- Vertical Air Receivers
- Air Line Fittings
- 1050 - Cap with Cylindrical Thread
- 1051 - Nipple with Conical Thread
- 1052 - Nipple with Cylindrical Thread
- 1054 - Connection with Cylindrical Thread
- 1055 - Reducer with Male/Female Cylindrical Thread
- 1060 - "L" Joint with Female/Female Thread
- 1064 - "I" Joint with M-F-F Thread
- 1068 - Cross Joint with M-F-F Thread
- 1069 - Cross Joint with M-F-F-F Thread
- 1071 - "V" Joint with M-F-F Thread
- 1072 - "V" Joint with F-F-F Thread
- Quick Release Couplings
- 2002 - Condensate Drain Ball Cock
- 2050 - Lever Female Ball Tap "Mini"
- Spares and Accessories
- Technical Support
- News
- Jobs
- Calculators
- Contact Us
- HELP
Energy Savings, Concepts & Calculators
Compressed air is a vital power source for millions of users. Technological advances means that our products are more energy efficient than ever. We don't just stop there however and we offer a design and support facility aimed at maximising your efficiency and reducing costs. We are experts in the employment of controls and systems which along with our leading technology including permanent magnet motor, variable speed compressors provide a significant advantage in terms of energy management.
Any compressor system needs to controlled correctly if you want to avoid higher energy costs. This is especially true when the system includes multiple compressors and where if not controlled correctly compressors may be inefficient due to excessive off load running and idling, over pressure generation and too many stop/start incidents amongst others.
Our intelligent multi control system - POWERNET is a load dependent control system that constantly monitors your demands and then looks to optimise the operation of the compressors to maximise efficiency. This may involve the shutting down and starting of the compressors in various combinations or sequences in order to avoid costly off load running and idling ( Compressors can consume 30% to 60% of the total on load power consumption, even though they may be off load and producing nothing!). The pressure band optimisation ensures that over pressure generation is avoided and again this saving can be significant (a further 6-8%)
For more in formation on our controllers please contact us
A selection of calculators for various applications in compressed air:
EnergySave Lite calculator Fixed Term Lease Calculator General Compressed Air Calculator
- Quick Unit Converter
- Pump-up calculator
- FAD Calculator
- Sandblasting Calculator
- Cylinder Calculator
- Pipe Pressure Drop Calculator
- Extended Unit Converter
Air compressors are clearly designed to generate an important energy source for industry, but they also generate a lot of heat during operation. This heat is present in the coolant of the compressor and in the air that is used to cool this coolant and indeed the compressed air. The electric motor that operates the compressor also generates heat. Typically all of this energy is wasted however using our heat recovery systems it is very easy to recoup this wasted energy for use in space heating and indeed the heating of water for washrooms or indeed any where hot or heated water is useful up to 70°C.
Space heating
Space heating is a relatively simple way to divert the heated air that is generated by the cooling system and the electric motor. The heated air can be directed or ducted to an area where the heat is use full it is also normal to have provision to divert the heated air during summer time for instance. Dependent of the distance to the point of use it may be necessary to employ insulation to the ducting or an additional fan to maintain the correct flow.
Water heating.
Using an additional coolant to water heat exchanger connected to the compressors cooling circuit, it is possible to recover significant amounts of energy for the generation of heated water up to 70°C. These heat exchangers can be fitted to most of our rotary screw compressors when supplied and in this case the installation is very convenient. We are also able to fit heat exchangers to existing compressors, subject to operating conditions and installation.
The availability of this essentially free energy source is driving much more awareness of this very attractive energy saving solution.
For more information please contact us
Condensate drains for fitting to air receivers and other devices where condensate is collected. FINI- Condensate drains. Automatic solenoid/timer controlled or automatic sensor controlled (only works when required with no los of compressed air, thereby saving energy. Range 1/8 G - 1/2G.
Compressed air is an invaluable power source for all sectors of industry, however it can be expensive and usually accounts for 12-15% of the total energy consumption for the plant. It therefore makes a great deal of business sense to understand your system and more specifically how to plug in to more efficient methods of production and the elimination of wasted energy due to inefficient operation and leaks etc.
The best way to determine the potential for saving energy from your compressed air system is to carry out an energy audit which involves the use of a data logger. The data logger is usually installed on site for a 7/8 day period and during this time fully monitors the system measuring the amount of air delivered, the amount of energy consumed and the network pressure during operation. This information is invaluable when considering new equipment or when looking to save energy by focusing on controls or maintenance (leaks) issues.
A comprehensive set of data and report is supplied following the exercise along with recommendations. Our data logging equipment is state of the art and totally reliable and provides very accurate analysis of your system. For more information on data logging or to request a data logging/audit please contact us