This tool will enable the selection of compressors based upon; motor power (kW/HP), capacity or flow (l/min or cfm) and the required pressure (bar or psi). If all fields are left blank then the full range of available products will be displayed. Refine your search if required using the `Refined Search`.

In addition to the basic Search facility you can look for any specific features required such as silenced, with dryer, receiver mounted, 400 volts, etc by selecting other features. In each section one or all choices can be selected, If no selection is made then all models will be shown. All values can be selected and deselected at any time. Please note that if a configuration is selected that is not possible then 0 models will be returned.

Choose between metric or imperial values (kW/HP, L/min or cfm and bar/psi)

Enter either the specific kW or HP (Imperial) rating for the product or range of products required. On entering the minimum value the maximum value will default to a 25% increase. For example if an 11 kW compressor is required then the maximum will show a value of 13.75. If a compressor is required from 11 kWs to 22 kWs then the maximum value box will need to be over written adding 22 in the MAX box. To ensure that a wider range is returned it is advised that the minimum value is slightly lower than the target. If a compressor from 15 HP is required it would be better to input 13 or 14 in the minimum value box.

Enter either the specific airflow capacity or the range of capacities required. The maximum value will default to 25% increase on the minimum value unless a specific value is added. For example if a 58 cfm (Imperial) compressor is required then 58 would be entered into the minimum box and the maximum box will default to a value of 72.5. If a compressor is required from 58 cfm to 100 cfm then the maximum value box will need to be overwritten adding 100 in the MAX box. To ensure that a wider range is returned it is advised that the minimum value is slightly lower than the target. If a compressor from 58 cfm is required it would be better to input 50 or 52 in the minimum value box.

Enter either the actual pressure or the range required. The maximum value will default to 25% increase on the minimum value unless a specific value is added. For example if an 8 bar compressor is required then 8 would be entered into the minimum box and the maximum box will default to a value of 10. If a compressor is required from 8 cfm to 13 bar then the maximum value box will need to be overwritten adding 13 in the MAX box. To ensure that a wider range is returned it is advised that the minimum value is slightly lower than the target. If a compressor from 8 bar is required it would be better to input 6 or 7 in the minimum value box.

Selecting `screw` will return all models using this technology. Selecting screw, scroll and piston will return all models using these values.

Selecting lubricated will return all models using this technology. Selecting lubricated and oil free will return all models using these values. If a choice is no longer required simply deselect.

Selecting 12/24 will return all models using this technology. Selecting 12/24, 110, 230, 400 and petrol/diesel will return all models using these values. If a choice is no longer required simply deselect.

Selecting a fixed speed will return all models using this technology. Selecting fixed speed and variable speed will return all models using these values. If a choice is no longer required simply deselect.

Selecting a portable will return all models using this technology. Selecting portable and stationary will return all models using these values. If a choice is no longer required simply deselect.

Selecting direct will return all models using this technology. Selecting direct and belt will return all models using these values. If a choice is no longer required simply deselect.

This is only available for compressors up to 22 kWs, compressor beyond this size. Selecting a yes will return all models that are available mounted on an air receiver. Selecting no will return all models that are floor mounted. If neither is selected then all models floor and receiver mounted will be returned

Selecting a yes here will return all models that are considered to be silenced. Silenced operation can be achieved by utilising acoustic cabinets for piston technology however this is normally a standard feature for all rotary screw and most scroll compressors. Selecting no will return all models that are NOT silenced. If neither is selected then all models will be returned.

This is only available for compressors up to 75 kWs. Selecting yes will return all models that have a built-in (directly connected to the compressor) dryer. Selecting no will return all models that have no built-in dryer. If neither is selected then all models will be returned.